Shadowfax
10-20-04, 08:04 AM
Second gen Stealths have amber-coloured front corner signal lights. I wanted to swap them out for some clear ones but could not find any aftermarket lights for the job. Here's what I did.
The OEM front corner signal lights on a '99 3000GT are about 80% clear, use amber bulbs, and are a very close fit for 2nd gen Stealths. I used a dremmel to trim off the bottom rear sharp corner of the '99 lights and then shaped in a curve to fit my '94 bumper.
Tip: Trim off less than you think and shape the corners slowly and carefully.
Thanks go out to fou for supplying me with the '99 Mitsu lights.
The OEM front corner signal lights on a '99 3000GT are about 80% clear, use amber bulbs, and are a very close fit for 2nd gen Stealths. I used a dremmel to trim off the bottom rear sharp corner of the '99 lights and then shaped in a curve to fit my '94 bumper.
Tip: Trim off less than you think and shape the corners slowly and carefully.
Thanks go out to fou for supplying me with the '99 Mitsu lights.