PDA

View Full Version : Mistsubishi performance crate motors????


violentpumpkin
07-22-06, 09:40 PM
Where can I find a short block for sale with forged internals (pistons)?
Where can I find some aftermarket heads that flow better?
Where can I find 15g turbo's for a decent price?
Where can I find the hard pipe kit for a front mount intercooler???
Where would I find clear tailights?
What would I need to do to my engine to run it @ around 22 psi? I will have a front mount intercooler, upgraded fuel injectors. A module that controls boost, timing, and fuel. What am I missing???
What's the smallest size turbo I can get away with 13g or 15g???

I had a 91 tt Stealth with stock turbos that I ran at 17.5 psi with the above mods but i want something faster, much faster.
I now have a red 95 vr4 that I bought with a blown moter, and my Stealth was stolen.

Thanks for any info, James

Quimby
07-25-06, 12:19 AM
Where can I find a short block for sale with forged internals (pistons)?
Where can I find some aftermarket heads that flow better?
Where can I find 15g turbo's for a decent price?
Where can I find the hard pipe kit for a front mount intercooler???
Where would I find clear tailights?
What would I need to do to my engine to run it @ around 22 psi? I will have a front mount intercooler, upgraded fuel injectors. A module that controls boost, timing, and fuel. What am I missing???
What's the smallest size turbo I can get away with 13g or 15g???

I had a 91 tt Stealth with stock turbos that I ran at 17.5 psi with the above mods but i want something faster, much faster.
I now have a red 95 vr4 that I bought with a blown moter, and my Stealth was stolen.

Thanks for any info, James
shortblock with what you want-www.3sx.com
Heads- Dynamic racing
15g's- I have some with 200 kms on them not 200 000 just 200 :), or ipsmotorsports sells them
PPE sells the FMIC piping
You need bigger injectors, fuel pump alcohol injection, a fuel controller like an e-manage ultimate or afc2.
-No one makes clear tail lights for these cars.

btw if you want to run 22psi, 13g's arent even in the ball park, and you will be pushing those 15g's to their limits.I see you live in edmonton aswell so that alcohol inj. is a must. we can't get high enough octane fuel here so if you did all that work and started running 22psi on pump gas you could kiss that motor good bye. I bought a snow performance kit and it looks like a good quality kit. I personally would never run 22psi even with my alky unless I had race gas in my car.

SpeedFreakSteve
07-25-06, 09:45 AM
Your best bet is to either get a new shortblock from Mitsu, or a j-spec motor and then get upgraded heads and cams from Dynamic Racing. But when its all said and done you're looking at about $8000-10000 for the heads/cams, motor, and all of the other supporting upgrades you'd need.