View Single Post
Old 06-23-11, 08:36 PM   #33
Registered User
rez604's Avatar
Trader Rating: (0)

Join Date: Feb 2008
Location: Ca
Posts: 457
so the leak is coming from behind the tb spring, im assuming its the butterfly valve shaft. actually im pretty sure it is. fuk. ill wait till i throw the clutch in to rebuild it at the same time. was able to hold some 11psi this time with my little compressor running out of steam to keep up.

filled oil back up, went to fill coolant and noticed i cant reach the front precat nuts -_- sob. pulled the rad back out and just waiting on those dam nuts. starting work tomorrow for another 4 days again, if the nuts come in im gonna start it up first day im off.

i also just realized i shouldve put rtv on the oil return line bolts before putting them into the pan, oh well. if it leaks ill pull them back off.
also noticed my transfer case was leaking from the breather tube again so filled it back up. only lost about 100cc
9b@13psi / 226awhp / 3750lb / 13.04@103mph 1.9'
15g@18psi / ???awhp / 3500lb / 12.50@115mph 1.9'

build thread
my visit to pitroadm
full vinyl wrapped 3000gt
the GTO bible - the JDM differences
rez604 is offline   Reply With Quote