View Single Post
Old 04-20-11, 02:13 AM   #2
Registered User
rez604's Avatar
Trader Rating: (0)

Join Date: Feb 2008
Location: Ca
Posts: 457
day 1:
got evoscan 2.8 up and running with OBDI. turns out you need a null modem cable to make it work. did a couple logs, nothing to report, everything looks good. have mmcd+palm as backup in the car.

day 2:
installed lc1 wideband[pic]. placed it in the stock o2 spot and using its narrowband signal as well. logging on evoscan via com4.
sent out injectors to get cleaned.

day 3:
testing of egrt input on ecu to use gm 3bar map[pic1] [pic2] [pic3] [pic4] [pic5] [pic6]. pin is there, circuitry is there, just wires are missing. tested limits, works. installed map and tested with evoscan, works. redid calculation in program to get accurate result. logging on evoscan now.
installed safc same time[pic1] [pic2]. zerod everything out. went for a drive to test, good to go.
9b@13psi / 226awhp / 3750lb / 13.04@103mph 1.9'
15g@18psi / ???awhp / 3500lb / 12.50@115mph 1.9'

build thread
my visit to pitroadm
full vinyl wrapped 3000gt
the GTO bible - the JDM differences

Last edited by rez604 : 05-25-11 at 04:48 PM.
rez604 is offline   Reply With Quote